| Quantity: | |
|---|---|
● Main uses of gabion cages
Control and guide rivers and floods: Release dams and diversion dams for rivers and floods to prevent soil erosion.
Rockfall protection: Used to prevent landslides and rockfalls.
Bridge protection: used for the protection of bridge structures.
Soil fixing structure: used for soil fixation and slope protection.
Coastal defense works: used for defense projects on seashores and ports.
Road protection: used for protection and retaining wall structures on both sides of the road.
● One-time molding production:
Except for the cover plate, the side plates, end plates and bottom plates are inseparable.
Length and width tolerances are ±5%, height tolerances are ±5%.
There are partitions every 1 meter inside to divide the cage into independent units.
● Assembly method:
Cover plates, side plates, end plates and bottom plates are produced individually and then assembled into cages.
Each part is wound and bundled with spiral steel wire, and all edge wires are made of thick wire to enhance the strength of the cage.
● Installation steps of gabion cages
1. Placement: Place the gabion cages at staggered seams to avoid longitudinal through seams.
2. Erect and tie and lock: Erect the four sides of the gabion cage and lock the adjacent edges with tie wires.The binding wire should be spirally tightened around two overlapping frame lines or the double-knotted edges of the frame line and the cage to avoid damaging the galvanized layer, and the thread pitch should not be greater than 50mm.
3. Fixing: When installing gabion cages on the completed bottom net, use binding wires to fix the lower frame of the newly installed gabion cage to the bottom net box.Adjacent gabions on the same layer are also tied to each other with binding wires to connect the cages into one.
4. Filling with pebbles: When constructing on the same horizontal layer of a certain unit project, first fill all the gabions in place before starting to fill with pebbles.In order to prevent cage deformation, the height difference between two adjacent cages (including adjacent cells of the same cage) should not be greater than 35cm.
5. Trim the bank slope and ground: Before installation, the bank slope and ground should be properly trimmed to maintain the original shape of the bank slope as much as possible, but there should be no obvious bulges and depressions.
6. Requirements for filling pebbles: The filled pebbles are selected from the floodplain, and their compressive strength should meet the design requirements. The particle size should be between 8 and 20cm. The sizes must be reasonably matched to achieve the porosity required by the design and ensure the safety of the cage. Straight line shape.
● Application scope of gabion cages
Highway and railway guardrails: used for protection and separation functions.
Slope protection and greening: used to stabilize and green slopes.
Mountain along the surface: used for hanging net spraying and tunnel protection.
Construction and Breeding Nets: Used for building construction and breeding fences.
Zoo fences and grassland fences: used for animal protection and grassland separation.
Flood control and berm engineering: used for flood control and berm fences.
River control and diversion: used to control and guide the direction of rivers.
Rock fall protection and bridge protection: used for rock fall protection and bridge protection.
Retaining walls and soil stabilization structures: used to construct retaining walls and soil stabilization.
Soil erosion prevention and seaside defense projects: Used to prevent soil erosion and seaside defense.
Port engineering: used for the protection and protection of ports.
● Production process:
Raw material selection (wire rod) - cold drawing/galvanizing/plastic coating - machine weaving - manual shearing and assembly - product inspection - packaging and transportation - installation and maintenance
● Preparation before installation
1. Read the construction drawings carefully to understand the specifications, dimensions and installation location of the gabion net.
2. Assess the geographical conditions and environmental factors of the construction site, and determine the construction difficulty and required resources.
3. Prepare the required construction equipment, tools and materials to ensure sufficient quantity and qualified quality.
4. Organize construction personnel to conduct technical briefings and safety training, and clarify construction tasks and safety responsibilities.
● Gabion installation steps
1. According to the design drawings, determine the installation location and boundaries of the gabion net.
2. Use measuring tools for positioning to ensure the installation position of the gabion net is accurate.
3. Expand the gabion net and fix it in the predetermined position to ensure that the mesh pieces are flat and the connection is firm.
4. Fill the interior of the gabion net with appropriate stones or soil, layer by layer, until the design height is reached.
5. Compact the filled gabion net to ensure overall stability.
● Construction precautions
1. During the installation process, ensure that the mesh pieces of the gabion mesh are firmly connected to avoid loosening or falling off.
2. When filling stones or soil, ensure that the filling is even and dense to avoid cavities or looseness.
3. Construction workers should wear safety protective equipment and abide by safe operating procedures to ensure construction safety.
● Regular inspection and maintenance
1. Check the gabion net regularly to observe its overall stability and integrity.
2. If the gabion net is found to be damaged, displaced or deformed, it should be repaired or replaced in time.
3. Check the status of the filling inside the gabion net. If loose stones or soil loss are found, they should be replenished and reinforced in time.
● Drainage and cleaning management
1. Make sure there is a good drainage system around the gabion net to avoid water damage to the gabion net.
2. Regularly clean the debris and dirt on the surface of the gabion net to keep it clean and beautiful.
● Avoid contact with harmful substances
1. The gabion net should avoid contact with chemical corrosive substances to avoid damage to it.
2. During construction and maintenance, environmentally friendly materials should be used and harmful chemicals should be avoided.
● Timely repair and replacement
1. Once the gabion net is found to be damaged or failed, it should be stopped immediately and repaired or replaced.
2. When repairing or replacing gabion nets, it should be carried out in accordance with the original design and construction requirements to ensure quality and safety.
●Safety training and operating specifications
1. Conduct regular safety training for construction and maintenance personnel to improve their safety awareness and operating skills.
2. Develop and comply with operating specifications to ensure safety and quality during construction and maintenance.
In summary, the installation, construction and maintenance of woven gabion nets is a comprehensive work, which requires full consideration of pre-construction preparations, installation steps, precautions, and subsequent inspection and maintenance.Only through careful construction and standardized management can the long-term stability and safety of gabion nets be ensured and their role in protecting and beautifying the environment effectively played.
|
|
|
|
|
|
● Main uses of gabion cages
Control and guide rivers and floods: Release dams and diversion dams for rivers and floods to prevent soil erosion.
Rockfall protection: Used to prevent landslides and rockfalls.
Bridge protection: used for the protection of bridge structures.
Soil fixing structure: used for soil fixation and slope protection.
Coastal defense works: used for defense projects on seashores and ports.
Road protection: used for protection and retaining wall structures on both sides of the road.
● One-time molding production:
Except for the cover plate, the side plates, end plates and bottom plates are inseparable.
Length and width tolerances are ±5%, height tolerances are ±5%.
There are partitions every 1 meter inside to divide the cage into independent units.
● Assembly method:
Cover plates, side plates, end plates and bottom plates are produced individually and then assembled into cages.
Each part is wound and bundled with spiral steel wire, and all edge wires are made of thick wire to enhance the strength of the cage.
● Installation steps of gabion cages
1. Placement: Place the gabion cages at staggered seams to avoid longitudinal through seams.
2. Erect and tie and lock: Erect the four sides of the gabion cage and lock the adjacent edges with tie wires.The binding wire should be spirally tightened around two overlapping frame lines or the double-knotted edges of the frame line and the cage to avoid damaging the galvanized layer, and the thread pitch should not be greater than 50mm.
3. Fixing: When installing gabion cages on the completed bottom net, use binding wires to fix the lower frame of the newly installed gabion cage to the bottom net box.Adjacent gabions on the same layer are also tied to each other with binding wires to connect the cages into one.
4. Filling with pebbles: When constructing on the same horizontal layer of a certain unit project, first fill all the gabions in place before starting to fill with pebbles.In order to prevent cage deformation, the height difference between two adjacent cages (including adjacent cells of the same cage) should not be greater than 35cm.
5. Trim the bank slope and ground: Before installation, the bank slope and ground should be properly trimmed to maintain the original shape of the bank slope as much as possible, but there should be no obvious bulges and depressions.
6. Requirements for filling pebbles: The filled pebbles are selected from the floodplain, and their compressive strength should meet the design requirements. The particle size should be between 8 and 20cm. The sizes must be reasonably matched to achieve the porosity required by the design and ensure the safety of the cage. Straight line shape.
● Application scope of gabion cages
Highway and railway guardrails: used for protection and separation functions.
Slope protection and greening: used to stabilize and green slopes.
Mountain along the surface: used for hanging net spraying and tunnel protection.
Construction and Breeding Nets: Used for building construction and breeding fences.
Zoo fences and grassland fences: used for animal protection and grassland separation.
Flood control and berm engineering: used for flood control and berm fences.
River control and diversion: used to control and guide the direction of rivers.
Rock fall protection and bridge protection: used for rock fall protection and bridge protection.
Retaining walls and soil stabilization structures: used to construct retaining walls and soil stabilization.
Soil erosion prevention and seaside defense projects: Used to prevent soil erosion and seaside defense.
Port engineering: used for the protection and protection of ports.
● Production process:
Raw material selection (wire rod) - cold drawing/galvanizing/plastic coating - machine weaving - manual shearing and assembly - product inspection - packaging and transportation - installation and maintenance
● Preparation before installation
1. Read the construction drawings carefully to understand the specifications, dimensions and installation location of the gabion net.
2. Assess the geographical conditions and environmental factors of the construction site, and determine the construction difficulty and required resources.
3. Prepare the required construction equipment, tools and materials to ensure sufficient quantity and qualified quality.
4. Organize construction personnel to conduct technical briefings and safety training, and clarify construction tasks and safety responsibilities.
● Gabion installation steps
1. According to the design drawings, determine the installation location and boundaries of the gabion net.
2. Use measuring tools for positioning to ensure the installation position of the gabion net is accurate.
3. Expand the gabion net and fix it in the predetermined position to ensure that the mesh pieces are flat and the connection is firm.
4. Fill the interior of the gabion net with appropriate stones or soil, layer by layer, until the design height is reached.
5. Compact the filled gabion net to ensure overall stability.
● Construction precautions
1. During the installation process, ensure that the mesh pieces of the gabion mesh are firmly connected to avoid loosening or falling off.
2. When filling stones or soil, ensure that the filling is even and dense to avoid cavities or looseness.
3. Construction workers should wear safety protective equipment and abide by safe operating procedures to ensure construction safety.
● Regular inspection and maintenance
1. Check the gabion net regularly to observe its overall stability and integrity.
2. If the gabion net is found to be damaged, displaced or deformed, it should be repaired or replaced in time.
3. Check the status of the filling inside the gabion net. If loose stones or soil loss are found, they should be replenished and reinforced in time.
● Drainage and cleaning management
1. Make sure there is a good drainage system around the gabion net to avoid water damage to the gabion net.
2. Regularly clean the debris and dirt on the surface of the gabion net to keep it clean and beautiful.
● Avoid contact with harmful substances
1. The gabion net should avoid contact with chemical corrosive substances to avoid damage to it.
2. During construction and maintenance, environmentally friendly materials should be used and harmful chemicals should be avoided.
● Timely repair and replacement
1. Once the gabion net is found to be damaged or failed, it should be stopped immediately and repaired or replaced.
2. When repairing or replacing gabion nets, it should be carried out in accordance with the original design and construction requirements to ensure quality and safety.
●Safety training and operating specifications
1. Conduct regular safety training for construction and maintenance personnel to improve their safety awareness and operating skills.
2. Develop and comply with operating specifications to ensure safety and quality during construction and maintenance.
In summary, the installation, construction and maintenance of woven gabion nets is a comprehensive work, which requires full consideration of pre-construction preparations, installation steps, precautions, and subsequent inspection and maintenance.Only through careful construction and standardized management can the long-term stability and safety of gabion nets be ensured and their role in protecting and beautifying the environment effectively played.
|
|
|
|
|
|
